150W Boost Converter DC-DC 10-32V to 12-35V Step Up Voltage Charger Module

Module Properties: non-isolated step-up module (BOOST)
65 * 56.5 * 23 (length * width * high) (mm)
Input voltage :10-32V
Output voltage: 12-35V (adjustable)
Output Current: 6A (MAX)
Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)
Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)
Easy to drive 65W 90W dual-core notebook.
Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c
Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
Input Reverse Polarity Protection: None (Please connect Series diode at the input port.)

Some Applications:
1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

Module parameters:

• Module properties: unfenced booster module (BOOST)
• The input voltage: 10-32 v
• (1) continuous adjustable output voltage (12-35 v)
• (2) fixed output (select) between 12-35 v, when buying, please tell the shopkeeper.
• Output current: 10 a (MAX)
• Input current: 16 a (MAX) (please strengthen heat, more than 10 a)
• Output power: natural cooling 100 w (MAX), strengthen heat 150 w (MAX) real power use time more actual situation, please Decide whether to add fans, please be sure to ensure heat sink temperature not to exceed 80 degrees.
• Easily lead to 65 w, 90 w notebook computers Including dual -With A 12 v battery with ordinary 19 v 3.42 A laptop module temperature of about 45 degrees
• Conversion efficiency: 94% (16 v input measured output is 19 v 2.5 A) (for reference only)
• The output ripple: 2% (MAX) 20 m bandwidth
• Working temperature: industrial grade (- 40 to + 80) (ambient temperature more than 40 degrees, please reduce power use, or add the fan)
• With temperature rise: 45
• No-load current: typical 25 ma
• Load regulation: plus or minus 0.5%
• Voltage regulation: plus or minus 0.5%
• Dynamic response speed: 200 us 5%
• Short circuit protection: no (please input with fuse or protective circuit)
• Input reverse connect protection: no, the buyer can be in the input series diode.
• Connection mode: from welding, and terminals