Features: 
Works with OBD-II compliant vehicles.
Software included in CD for Smartphone, PC and iOS (for iPhone, iPad, iTouch, Mac).
Clear trouble codes and turn off the MIL (“Check Engine” light).
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

 

How to see if your vehicle is comliant with OBD II?
Please pop the hood and look for a sticker named “VEHICLE EMISSION CONTORL INFORMATION”.

Vehicle Coverage:

Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)

Alfa Romeo/ Ad/ Bentley/ BW/ Cadillac/ Chevrolet/ Chrysl/ Citroen/ Daewoo/ Fiat/ Ford/ GM/ Hod/ Hyundai/ Isuzu/ Jaguar/ Jeep/ Kia/ Land Rover/ Lexus/ Mazda/ Mercury/ Mini/ Nissan/ Mitsubishi/ Opel/ Peugeot/ Posch/ Renault/ Rover/ Saab/ Seat/ Skoda/ Toyt/ Vauxhall/ Volvo/ VW

Please verify that your vehicle is OBD-II compliant by looking under the hood for a sticker indicating compliance.

 

For your information:

For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.

   

WI-FI OBD AUTO CHECKER is capable of communicating with vehicles which adopt following

 

 Protocols:
ISO 9141
ISO 11898(aka. CAN)
ISO 14230(aka. KWP2000)
ISO 15765(aka. CAN)
SAE J1939

 

Following are some of the parameters which could be read from the vehicle.
Vehicle Speed
RPM
Fuel Consumption*
Engine Coolant Temp
Fuel Pressure
Calculated Engine Load
Throttle Position
Intake Manifold Pressure
Air Intake Temp
Timing Advance
Mass Air Flow
Fuel Level
Barometric Pressure
EVAP System Vapor Pressure
Fuel Trim
*note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer’s implementation.

 

Where can I get the software?
You can log on to the apple application store to get your commercial software, such as Dynolicious.
And There is a software in the CD-ROM comes along with the device. You can use this piece of software to config and test the WI-FI OBD AUTO CHECKER.

 

Specifications:

• Material: automotive grade plastic
• Operating temperature: -15 to 100 Deg Celsius
• SSID: WiFiOBD
• IP: 192.168.0.10
• Subnet: 255.255.255.0
• Port: 35000
• Range: 50 ft (Line of sight)
• Antenna: Internal
• Power Consumption: 0.75 Watts (With Power Switch)
• Wifi Standard: 802.11a/b/g
• Item size: 9 * 5 * 3cm (3.5 *  2.0 * 1.2in)
• Item weight: 75g/2.6oz

 

Instructions:

1. Install a compatible automotive diagnostic application in the host device.

2. Plug this OBD2 Wi-Fi scanner into your car, connect it to a Wi-Fi enabled device.

 

3. Then the ELM327 interface will quickly send data to your iPhone, iPad, iPod Touch or  Windows computer from your vehicle.

 

Item Includes:
1 * Wi-Fi ELM 327
1 * CD with software

Mini ELM327 Available cars:
Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)