The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

• internal motherboard, U disk shell using aluminum alloy installation, convenient to carry, safe and reliable!
• interface definition on the shell directly tagging, be clear at a glance, convenient and practical!
• 5 V, 3.3 V available at the same time, convenient for you to link the 5 V and 3.3 V target board
• shell characters using laser laser, laser engraving, never fade off! Permanent clear!
• internal motherboard with 500 ma self recovery fuse, completely protect your expensive computer motherboard!
• The LED indicator light, convenient you always observes the working state of the ST cc-link V2!
• Distribution 4 with dupont line, let you can easily cope with different target plate line order!
• Use anti-static bag packaging, automatic sealing machine sealed packaging, safe and reliable, does not fear the electrostatic, not afraid of water!

Functions and features:

1. support the whole series of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don’t need to read instructions!
2. support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported.
3. support firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4.
4. + 5 v power supply output, output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2!
5. easy interface to use pure copper plating 2.54 spacing horn, with 20 cm dupont line, can deal with different target board line sequence, flexible connection;
6. use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.

 

Support the software version is as follows:

1. ST cc-link Utility 2.0 and above
2. the STVD 2 and above
3. STVP 3.2.3 and above
4. IAR EWARM V6.20 and above
5. IAR EWSTM8 V1.30
6. KEIL RVMDK V4.21 and above